
Standard Pallet Size and Types of Pallets: A Shipping Guide for US Importers
Last updated: November 19, 2026
In short: A pallet is a flat platform that holds cartons so a forklift can move them as one unit. In the US, the common pallet is 48 x 40 inches. A factory outside North America may pack on a different size, so tell yours which one you need. Pick the pallet type for the goods and the destination rules, then decide whether to pallet-load or floor-load the container.
What is a pallet in shipping?
For an importer, a pallet is the base under your export cartons. Cartons are stacked on it, wrapped, and often strapped. A forklift or pallet jack lifts the whole stack through slots in the pallet.
Here is an example. A run of ceramic mugs ships in cartons stacked on four-way entry wooden pallets with the ISPM 15 stamp. The factory loads the pallets into a 40 ft container, and your warehouse unloads them with a forklift.
Pallet size is written as length x width, then height.
What is the standard pallet size?
There is no single worldwide pallet size. The international standard ISO 6780 lists six standard footprints, and regions mostly use different ones. The common US pallet is 48 x 40 inches.
| Pallet size | Where it is common | Note |
|---|---|---|
| 48 x 40 in (1,219 x 1,016 mm) | North America | Common US warehouse size |
| About 47.2 x 31.5 in (1,200 x 800 mm) | Europe | Often called the Euro pallet |
| About 47.2 x 39.4 in (1,200 x 1,000 mm) | Europe and Asia | Close to, but not the same as, 48 x 40 in |
| About 43.3 x 43.3 in (1,100 x 1,100 mm) | Asia | Square footprint |
A pallet that fits a US dock may load differently in a container. Ask the factory which size it will use, and put the size on the spec. Check the container interior in our shipping container sizes guide.
What are the main types of pallets?
- A four-way entry block wooden pallet lets a forklift enter from any side
- A two-way stringer pallet lets it enter from two sides, or partly from four if the stringers are notched
- A nestable plastic export pallet for light, one-way export loads
- A rackable plastic pallet for warehouse racking
- A steel or aluminum pallet for heavy or special loads
- A corrugated paper pallet for light cartons and air freight
- A presswood or molded wood pallet
A slip sheet is a thin sheet under the load. It is a no-pallet option for some goods.
| Type | Material | Typical use | Trade-off |
|---|---|---|---|
| Block pallet | Wood | General export cartons | Needs the ISPM 15 stamp |
| Stringer pallet | Wood | Lighter loads | Fewer entry sides |
| Nestable pallet | Plastic | Light, one-way export | Not suited to open-beam racking |
| Rackable pallet | Plastic | Warehouse racks | Heavier and costlier than nestable plastic |
| Metal pallet | Steel or aluminum | Heavy or repeated use | Steel is heavy; aluminum saves weight |
| Paper pallet | Corrugated | Light cartons, air freight | Moisture and rough handling cut strength; not for racking |
Is a wood or a plastic pallet better for imports?
It depends on the load and the receiving end. Wood is common and easy to repair. Plastic is generally easier to wash, because it does not absorb moisture, and it is not regulated as wood packaging. Weight, racking fit, and cost all differ, so compare quotes. Your warehouse, 3PL, or retailer may set the rule, so ask them first. See 3PL vs 4PL and Amazon FBA prep.
Is your factory who it says it is before it loads your pallets?
Get a supplier verification report before you pay a deposit.
Get your supplier verifiedWhat is ISPM 15, and does your pallet need it?
ISPM 15 is an international standard for treating wood packaging. In the US, regulated wood packaging must be treated and carry a permanent mark. The mark shows a symbol, a two-letter country code, a producer number, and the treatment, such as HT for heat treated.
A pallet without the mark can be ordered back out of the country at the port of first arrival. The USDA lists plastic pallets, plywood, and metal frames as products it does not regulate as wood packaging. Ask the factory for photos of the stamp before loading.
How many pallets fit in a 20 ft and a 40 ft container?
The count depends on the pallet size, the stack height, and the weight limit. We do not give a fixed number, because it changes with the load. Ask your forwarder to plan the load. See the LCL vs FCL guide, the freight forwarder guide, and sea freight from China.
Should you palletize or floor-load your container?
Pallets make loading and unloading faster, and they protect cartons. They also take up some container space. Floor-loading can fit more cartons, but it takes more hand labor and can mean slower unloading and more handling damage. A warehouse with a forklift dock suits pallets. A small dock without one may suit floor-loading. Ask your receiver first.
Gross weight includes the pallets. See net weight vs gross weight. If goods arrive damaged, see our OS&D claims guide.
How do you brief a factory on pallets?
Put these on your product specification sheet:
- Pallet type and size
- The ISPM 15 mark
- Cartons per layer and layers per pallet
- Maximum pallet height and gross weight
- Stretch wrap, corner boards, and strapping
- Shipping marks and labels on each pallet face
- A loading photo set
Book a container loading check as well as your pre-shipment inspection. The inspector checks the pallets and cartons as they go in and photographs the loaded and sealed container. See our pre-shipment inspection guide and shipping documents explained. For carton and product boxes, see custom packaging. Who books the freight depends on your terms too. See FOB from China. For the full path, see importing from China to the USA and our sourcing agent page.
FAQs
What is the standard pallet size in the US?
It is 48 x 40 inches. Imports can arrive on other sizes, such as 1,200 x 800 mm (about 47.2 x 31.5 in) or 1,100 x 1,100 mm (about 43.3 x 43.3 in), so confirm the size with the factory.
How many pallets fit in a 40 ft container?
It varies with the pallet size, stack height, and weight limit. Your forwarder can plan it from your carton sizes.
Do plastic pallets need an ISPM 15 stamp?
The USDA says plastic pallets are not regulated as wood packaging. Wood pallets need treatment and the mark. Confirm with your carrier and receiver.
Is it cheaper to floor-load or to use pallets?
It depends on freight, labor at both ends, damage risk, and the receiving dock. Compare both with your forwarder.
Can Epic help me spec pallets and packing for my factory?
Yes. Our team can help you write the pallet and packing spec, check cartons and packaging during the pre-shipment inspection, and arrange a container loading check with photos. Your factory and forwarder supply the pallets and load the container.
Want help writing a pallet and packing spec for your factory?
Talk through your cartons, pallet size, and loading plan with Epic Sourcing.
Book a free discovery chatRelated Articles
Let’s Make It Epic
We're here to make sourcing simple, and a whole lot less stressful.
We are experiencing a higher volume of enquiries than usual. Our standard reply time for form submissions and emails is within 72 hours.
If your matter is urgent, please schedule a video call using the link below.



